As solar water pump systems become more and more popular, people's functional requirements for solar water pump systems are becoming more and more extensive.

Some time ago, a friend from South Africa asked me how to turn on and off the solar water pump system by turning on and off the tap. He was working on a school project and hoped to use solar energy to supply water on the playground. He hoped that when the tap was turned on, the solar water pump system would start working and provide water, and when the tap was turned off, the solar water pump system would stop working.

This article introduces the pressure control intelligent solar water pump system

From the diagram, we can intuitively see that the pressure-controlled solar water pump system mainly consists of:

This system, in contrast to the common solar water pump system, has a pressure switch. The pressure switch can control the opening and closing of the solar water pump system by setting the corresponding opening/closing pressure. The pressure switch is the core equipment of the pressure control solar water pump system.

As can be seen from the diagram, in the connection of the pressure control switch, the pressure control switch needs to be connected to the water outlet of the water pump, and at the same time, the pressure controller needs to be connected to the DC water pump controller. Here is mainly the connection introduction of pressure control switch

After the connection is completed, under the condition of sufficient solar energy, the pressure switch can sense the pressure of the water pump, thereby realizing the on-off control of the water pump system.

This is the most basic pressure-controlled solar water pump system, which is for your convenience to understand this concept. If you have more functional requirements for different solar water pump systems, please contact us and we will work with you to design and customize your intelligent solar water pump system solution.

Thanks